Battery Powered LED Lamp
Now Available with V3 Software! Click Here for Upgrade Info
What's new in V3 software:
- New Color Temp: 4300K.
- 50% 3000K and 50% 5600K giving you a new level of 4300K
- Operating while charging!
- Ability to update V3 lamps
- Q5 - 7" 5 watts - 3,550 mAh LiOn Battery
- Q10 - 12" 10 watts - 6,400 mAh LiOn Battery
- Q20 - 24" 20 watts - 12,800 mAh LiOn Battery
Color Temp: 3000K/4300K/5600K
Press and hold the power button to alternate between color modes.
Dimming Levels: 100%, 75%, 50%, 25%, 10% OFF
A single button press cycles through the dimming levels
3/8" Threaded Receiver (Threaded Pin available here)
NEW Recessed Power Button (V3)
Kill switch to disable power button when traveling (V3)
Rechargeable Lithium Ion Battery
Charges from Mirco USB power adapter - V3.0 -9V @2A / 12V 1.5A
-(Will not charge on standard 5v USB Charger)
Battery Level Indicator
Runs for about 4 hours at 100%.
25,000 + Hour Lifetime
August 2017 - 2nd Generation lamps
February 2018 - 3rd Generation lamps
- with Recessed Power Buttons, Kill and Rest Buttons
Press button once to turn on.
Press multiple times to dim.
Press and hold to change from 3000k to 5600k.
To disable the Power Button when traveling, using a pen, press and hold the the KILL button button on the side for 5 seconds.
To enable the Power Button after it has been killed, plug it into your charger.
To Reset the lamp to default settings of 5600k and 100%, press the RST button.
If the Q-Lion LED will charge but will not turn on with a button press, press and hold the kill button for 5 seconds. Then plug back into the QC 3.0 Charger.
3/8" Accessory Pin for the Q-Lion Lamps
Q-LION C 3.0 MULTI CHARGER